Table Bugg? Why is this happening - Adding to wrong row..

KIIVIIN

Hello,

Im using a change table value rule that adds +50 to my max health.
I tried to remove the change table rule to see if I got anything else messing this up but no.. Nothing else adds the max health when I level up if the change table rule is not there.

So I tried to add the change table value again.. And again it adds to the row 2 collum 2 when I clearly set row 1 collum 2...
Check the pictures.

Is it me or is GS bugged here??
I did remove everything to see if something else adds to the row but no they stay the same if I level up.. so thats not the issue here.

These pictures should be correct right? Im confused why the program behave like this. And sometimes when I drag my mouse over stuff it by it self adds conditions without me clicking them / draging them haha..

regards

The_Gamesalad_Guru

The value should say 50 not the table cell call. You can't force a value against itself from the same table cell. If you just want it to return to 50 put 50 in the value. If you want to add 50 to the current value do tablecellvalue (table,1,2)+50. Don't forget to save the table after the change.

Have you watched any videos on tables?

KIIVIIN

@Lost_Oasis_Games said:
The value should say 50 not the table cell call. You can't force a value against itself from the same table cell. If you just want it to return to 50 put 50 in the value. If you want to add 50 to the current value do tablecellvalue (table,1,2)+50. Don't forget to save the table after the change.

I dont think I explaned good enought. There is +50 on the value with the table..
Thats not the issue. I got the issue that when I use the picture setup it adds to the row nr 2 collum 2... When I change that it should add to row 2 collum 2 it adds to row 1 collum 2.. So the issue here is that it adds to the wrong ROW & COLLUM. Not the one I set up like the picture says.

I know how to add to rows.. But my question is why it adds to the MAX MANA instead of the MAX HEALTH collum. As you can see on the picture it clearly states that it should add to ROW 1 COLLUM 1.

As said before if I change it to row 2 collum 2 it adds to the row 1 collum 2.

The_Gamesalad_Guru

Try trashing that behavior and bring in a new one and redo it. It may be corrupted.

KIIVIIN

Nvm I restarted GS a> @Lost_Oasis_Games said:

Try trashing that behavior and bring in a new one and redo it. It may be corrupted.

I did that already but again it did the wrong adding.
Now it works, I restarted GS and the project.

There is something to check up for the developers.
Thats not the only bugg I found. Also as said sometimes without doing anything and only draging my mouse it drags / drops conditions without me clicking anything.

Windows GS is a bit bugged

The_Gamesalad_Guru

Submit a bug report. Continually overwriting a file can cause issues. It's good every so often to do a save as and begin working off that new file. Also be sure to make a copy of your progress and make a save as file and zip it for a backup.